Maskfog
Last updated
Was this helpful?
English
Last updated
Was this helpful?
Before integration, you need to complete the following preparations
Download and install Maskfog
Get the proxy IP, please refer to the tutorial
1. Click Proxy Service-Configure Device
2. Enter the proxy information
Enter the proxy name and select the proxy type according to the needs. Here, socks5 is used as an example
Then paste the IP and port to the proxy host and proxy port position
Click Detect Proxy. After the detection is successful, click Confirm
3. Click New Configuration, select Proxy List, and click Proxy
4. Bind the configured proxy server and close the window
5. After the binding is successful, click OK
6. In the configuration You can see the successfully configured browser in the configuration management interface, click Open and use it
1. Click Proxy Service-Configure Device
2. Enter proxy information
Enter the proxy name and select the proxy type according to the needs. Here we take socks5 as an example
Fill in the IP, port, account, and password in the corresponding position
Click Detect Proxy. After the detection is successful, click Confirm
3. Click New Configuration, select Proxy List, and click Proxy
4. Bind the configured proxy server and close the window
5. After the binding is successful, click OK
6. You can see the successfully configured browser in the configuration management interface, click Open and use it
You have successfully integrated LunaProxy with Maskfog!
Connection failed
If the detection fails, please refer to our test tutorial:
