BitBrowser

Step1: Preparation

Before integration, you need to complete the following preparations

1. Download, install and log in to Bit Browser

2. Get the proxy IP, please refer to the tutorial: Dynamic Residential Proxy

Step2: Proxy Configuration

API Configuration

API configuration is authenticated through the IP whitelist. Please make sure that you have added the local IP to the whitelist before configuration

To add a whitelist, please refer to the tutorial

1. Click Browser Configuration - Add

image.png

①IP, Port

A. Click Custom Proxy

B. Copy the extracted IP and port and paste them to the host port of the configuration interface

C. Click Detect Proxy to check whether the proxy is available. As shown in the figure, the detection is successful

image.png

②API Link

A. Click Used API Extraction at the proxy and paste the API link to the Extraction Link

B. Click Detect. As shown in the figure, the extracted IP appears below. port, the detection is successful

image.png

2. After the configuration and detection are successful, click Confirm

image.png

3. You can see the successfully configured browser in the browser configuration interface, click Open to use

image.png

Account and password configuration

1. Click Browser Configuration-Add

image.png

① Click Custom Proxy and select the protocol to be used. Here, the socks5 protocol is used as an example

② Paste the host, port, account, and password to the corresponding position

③ Click Detect Proxy, as shown in the figure, the detection is successful

image.png

2. After the configuration and detection are successful, click Confirm

image.png

3. You can see the successfully configured browser in the browser configuration interface, click Open to use

image.png

You have successfully integrated LunaProxy with BitBrowser!

Connection failed

If the detection fails, please refer to our test tutorial: Proxy cannot connect